A bathroom takes more abuse per square foot than any other room: daily steam, standing water and constant use. Good bathroom remodeling in Bellevue is as much about what goes behind the tile (waterproofing, venting and drainage) as the finishes you see. Renovation WA remodels hall baths, primary suites and powder rooms for homeowners across Bellevue and Kirkland.
Want to talk through your bathroom? Phone (425) 624-4242 to set up a free consultation at your home. After the visit, you’ll receive a written scope and line-by-line pricing for the work we discussed.

What Goes Into a Bathroom Remodel
Showers, Tubs and Tub-to-Shower Conversions
Swapping a seldom-used tub for a walk-in shower is one of the most requested changes. It involves resizing the drain, building a properly sloped shower pan, and choosing between a curb, a low threshold or a curbless entry. For layouts and finish inspiration, browse our walk-in shower ideas.
Waterproofing and Tile
Tile by itself is not waterproof. A continuous membrane behind and beneath it, sealed at seams, niches and valve openings, is what keeps water out of the framing. We treat this layer as the most important part of the job, even though nobody sees it once the tile is set.
Vanities, Storage and Counters
A single vanity with plenty of drawers often serves a family better than a double sink with cramped cabinets. We look at outlets, mirror height, medicine cabinets and towel storage together so the room works at seven in the morning.
Ventilation, Lighting and Fixtures
An exhaust fan sized for the room and ducted outdoors, not into the attic, is the best defense against mildew. We pair it with good light at the mirror for grooming and enough overhead light for cleaning.
Hall Baths, Primary Suites and Powder Rooms
Each type of bathroom calls for different priorities. A hall bath shared by kids or guests needs durable surfaces, often a tub for bathing young children, and storage that can handle a crowd. A primary bathroom is where homeowners tend to invest in a larger shower, a double vanity or heated floors. A powder room is small enough that a bold tile or wallpaper choice won’t overwhelm the budget.
Not sure which direction fits? Our bathroom remodel ideas collect layouts and finishes for each type, and the bathroom remodel cost guide outlines what drives the budget.

Bathrooms in a Pacific Northwest Climate
Long, damp winters on the Eastside mean bathrooms rarely dry out on their own. When walls open up in older Bellevue and Kirkland homes, it is common to find fans vented into attics, failed grout letting water reach the subfloor, or aging supply lines. Those are worth correcting while the room is down to the studs.
Relocating a toilet, moving a shower drain, adding a circuit or installing a new exhaust fan generally requires a permit. Our remodeling permit guide for Bellevue explains which bathroom changes need one and how inspections work.
Heated floors are a popular upgrade in this climate. Electric radiant mats go under the tile and need a dedicated circuit, so they are easiest to add when the floor is already being replaced. If the hallway or bedroom floors are due as well, our flooring installation team can carry new material right up to the bathroom door.
Our Bathroom Remodeling Process
- Consultation in your bathroom. We look at the plumbing layout, check for signs of water damage, and discuss how the room is used day to day.
- Design and fixture choices. Shower configuration, tile, vanity, lighting and plumbing fixtures are selected and confirmed before ordering.
- Estimate and calendar. You get itemized pricing and a written schedule. The timeline depends on scope, and the confirmed dates appear in your written estimate.
- Demolition and rough-in. We strip the room, correct framing or subfloor problems, and set plumbing and electrical for inspection.
- Waterproofing, tile and finishes. Membrane, tile, vanity, glass and fixtures go in, followed by a final walkthrough together.
Bathroom projects are scheduled under our 100% on-schedule guarantee, which matters most when the room being remodeled is the only full bath in the house.
Bathroom Remodeling in Bellevue, Kirkland and Nearby
We remodel bathrooms throughout Bellevue and in Kirkland; our Kirkland home remodeling page covers that area in more detail. If the bathroom is one of several rooms you plan to update, ask about combining the work so demolition, permits and inspections are coordinated once.
Bathroom Remodeling FAQs
Can I convert my bathtub into a walk-in shower?
In most bathrooms, yes. If it’s the only tub in the house, think about young children and future buyers first. On the technical side, the drain usually has to be moved and enlarged, and the floor built up or recessed for proper slope.
What does a curbless shower require?
A zero-threshold entry needs the shower floor to sit lower than the surrounding bathroom floor, which can mean modifying joists. It is achievable in many homes but should be settled during design, not discovered during demolition.
How do I keep mold from coming back?
Use a properly sized fan ducted outdoors, run it during and after every shower, and make sure the walls behind the tile are waterproofed rather than relying on backer board alone. A humidity-sensing fan control helps when family members forget.
Will I be without a bathroom during the remodel?
If you have a second bathroom, the disruption is manageable. If this is your only one, tell us at the first meeting so sequencing can be discussed before the schedule is set.
What should I decide first?
Start with the shower or tub configuration and the vanity size, since those set the plumbing layout. Tile, fixtures and lighting follow from there.
Let’s Plan Your New Bathroom
Ready to replace the bathroom you’ve been putting up with? Call (425) 624-4242 or contact us online to arrange a free consultation, and tell us which room you’d like to start with.


