Kitchen cabinet cost in Bellevue typically runs $150 to $650 per linear foot installed for semi-custom cabinets, which is what most Eastside kitchen remodels use. Stock cabinets start around $100 per linear foot installed and fully custom cabinetry reaches $500 to $1,200 per linear foot, according to HomeAdvisor’s cabinet cost data. For a typical 10×10 Bellevue kitchen with 20–25 linear feet of cabinetry, that means roughly $8,000 to $35,000 for mid-range work.
This guide breaks down kitchen cabinet cost by grade, material and construction, shows what installation labor costs in King County, compares replacing with refacing and repainting, and explains which cabinet choices hold value in Bellevue’s housing market.
- Average Kitchen Cabinet Cost in Bellevue
- Cost by Grade: Stock vs. Semi-Custom vs. Custom
- Kitchen Cabinet Cost by Kitchen Size
- Cabinet Materials and Construction
- Cabinet Installation Labor in Bellevue
- Replace vs. Reface vs. Repaint
- Hardware, Organizers and Other Add-Ons
- How to Save on Kitchen Cabinets
- FAQs
Average Kitchen Cabinet Cost in Bellevue
Nationally, most homeowners spend $4,000 to $13,000 on cabinets for a 10×10 kitchen, with a full range of $2,000 to $24,000. Seattle-area pricing lands in the upper half of that range because labor costs more and Bellevue buyers favor semi-custom and custom frameless cabinetry. Cabinets are usually the single largest line item in a kitchen remodel — about 25% to 35% of the total budget, as our kitchen remodel cost guide explains.
Cost by Grade: Stock vs. Semi-Custom vs. Custom
| Grade | Cabinets only (per linear ft) | Installed (per linear ft) | 10×10 kitchen installed |
|---|---|---|---|
| Stock | $50–$100 | $100–$300 | $2,500–$7,500 |
| Semi-custom | $75–$400 | $150–$650 | $4,000–$16,000 |
| Custom | $300–$750 | $500–$1,200 | $12,500–$30,000+ |
Stock cabinets
Pre-built in standard 3-inch width increments, available in days. Fine for rentals and budget refreshes, but limited finishes and filler strips are needed to make them fit most Eastside kitchens.
Semi-custom cabinets
Factory-built to order with a wide choice of door styles, finishes, depths and organizers; lead times of 4–8 weeks. This is the sweet spot for kitchen cabinet cost versus quality in most Bellevue remodels — you get plywood boxes, soft-close hardware and a tailored fit without custom-shop pricing.
Custom cabinets
Built by a local shop to your exact dimensions, species and finish, with 8–14 week lead times. Worth it for unusual layouts, tall ceilings, integrated appliance panels and the high-end look buyers expect in West Bellevue, Somerset and Bridle Trails.
Kitchen Cabinet Cost by Kitchen Size
| Kitchen size | Linear feet of cabinetry | Semi-custom installed | Custom installed |
|---|---|---|---|
| Small (under 70 sq ft) | 12–18 ft | $4,000–$11,000 | $9,000–$20,000 |
| 10×10 (100 sq ft) | 20–25 ft | $6,000–$16,000 | $12,500–$30,000 |
| 12×12 (144 sq ft) | 25–30 ft | $8,000–$20,000 | $15,000–$36,000 |
| Large with island (200+ sq ft) | 35–45 ft | $12,000–$30,000 | $22,000–$55,000+ |
Islands add 6–12 linear feet of base cabinets plus a countertop; tall pantry and appliance cabinets cost two to three times as much per foot as standard base cabinets.
Cabinet Materials and Construction
- Boxes: plywood boxes cost 10–20% more than particleboard but hold up far better to Pacific Northwest humidity and under-sink leaks.
- Doors: painted MDF shaker doors are the most popular choice in Bellevue; solid maple, white oak and walnut add $5–$50 per linear foot depending on species.
- Laminate and thermofoil: $4,000–$15,000 for a full kitchen; budget-friendly but harder to repair.
- Frameless (European) construction: about 15% more than framed, with more usable storage and the flat, modern look that dominates new Eastside homes.
- Finishes: factory-applied conversion varnish outlasts site-painted finishes and is worth the premium on high-use kitchens.
Our kitchen cabinet styles guide compares shaker, slab, raised-panel and glass-front doors with current trends.
Cabinet Installation Labor in Bellevue
Professional installation runs about $50 to $200 per linear foot in the Seattle area, or $2,000 to $6,000 for a typical kitchen. Costs climb when walls and floors are out of level (common in pre-1990 homes), when crown molding, light rails and end panels are added, or when plumbing and electrical have to be moved to suit a new layout. Demolition and disposal of old cabinets adds $500–$1,500.
The National Kitchen & Bath Association (NKBA) publishes planning guidelines for clearances, landing space and work zones — following them during layout prevents costly rework after cabinets are ordered.
Replace vs. Reface vs. Repaint
| Option | Typical Bellevue cost | Best when |
|---|---|---|
| Repaint | $3,000–$8,000 | Boxes and layout are sound; you want a color change |
| Reface | $7,000–$18,000 | Boxes are solid; you want new doors, drawer fronts and veneer |
| Replace | $8,000–$35,000+ | Layout changes, damaged boxes, or a full kitchen remodel |
Our kitchen cabinet remodel guide walks through how to choose between the three paths with a 60-second checklist.
Hardware, Organizers and Other Add-Ons
- Pulls and knobs: $3–$25 each; a full kitchen needs 30–50 pieces
- Soft-close hinges and drawer glides: often included in semi-custom lines; $5–$15 per door or drawer as an upgrade
- Pull-out trash, spice racks, lazy susans, drawer dividers: $150–$600 each
- Under-cabinet lighting: $300–$1,500 installed
- Crown molding, light rail and decorative end panels: $500–$3,000
- Countertops: budgeted separately — see our quartz vs. granite vs. quartzite comparison
How to Save on Kitchen Cabinets
- Keep the existing layout so plumbing, gas and electrical stay put.
- Choose semi-custom with plywood boxes instead of custom; spend the difference on hardware and organizers you’ll use daily.
- Use painted MDF doors instead of solid wood for a shaker look at lower kitchen cabinet cost.
- Order cabinets early — lead times, not labor, usually set the schedule.
- Combine cabinets, counters and flooring in one kitchen remodel so demolition and trades are shared.
Renovation WA supplies and installs kitchen cabinets across Bellevue, Kirkland and the Eastside — including Newport Hills, Juanita and Wilburton — through our cabinet installation service and full kitchen remodeling service, with every project backed by our 100% on-schedule guarantee.
FAQs
How much do new kitchen cabinets cost in Bellevue?
Most Bellevue kitchens spend $8,000 to $35,000 on cabinets installed. Stock cabinets for a small kitchen can come in under $5,000, and custom cabinetry for a large kitchen with an island can exceed $50,000.
What is the cost of kitchen cabinets per linear foot?
Installed, about $100–$300 for stock, $150–$650 for semi-custom and $500–$1,200 for custom cabinets. Tall and specialty cabinets cost more per foot than standard base and wall cabinets.
Is it cheaper to reface or replace kitchen cabinets?
Refacing usually costs 40–60% of replacement when the boxes are sound. If you’re changing the layout or the boxes are water-damaged, replacement is the better long-term value.
How long does cabinet installation take?
Installation itself takes 2 to 5 days for a typical kitchen. Add 4–8 weeks of lead time for semi-custom cabinets and 8–14 weeks for custom.
Want an exact number for your kitchen? Request a free cabinet estimate from our Bellevue team.
